I have a small zigbee (mini-z1-3ch ) relay module having a ribbon with tiny wires I’m planning to connect to push buttons.

I don’t have proper connectors for small wires like that and I’m not sure what’s appropriate. Maybe someone here would have a suggestion ?

  • CameronDev@programming.dev
    0·
    1 day ago

    Might want to check a homeassistant community as well.

    I’m guessing your not referring to the screw terminals, because those should have mains voltages in them?

    The ribbon that I could see looks like fairly standard gauge DuPont wires, which you can get from Aliexpress (https://www.aliexpress.com/item/1005004647016228.html)

    Otherwise, if you need smaller, worth looking at enamel wire. You can get it in lots of sizes, including very fine. Its covered in enamel, so safeish (https://www.aliexpress.com/item/4000580738993.html)

    The biggest drawback is that its fiddly and not colour coded, you’ll want tweezers to help hold while soldering.

    • mikke@feddit.nlOP
      0·
      1 day ago

      Thanks for answering. Actual wiring is not an issue, I’ve found 0.5mm² automotive wiring in 10m length but it’s more about what kind of connector (like wago but for tiny wiring) I’m not sure.

      Bonus would be something that fits a din rail, but that’s totally optional

      • elDalvini@discuss.tchncs.de
        0·
        1 day ago

        You can use most of the connectors you would use for bigger wires. Wago lever nuts are rated for conductors as small as 0.14 mm².

        If you want something to fit a din rail, standard terminal blocks (something like this) should also work.