Just bought my first ever acoustic guitar (a Taylor Big Baby) used on a local craiglist-equivalent for about 130$. It came in the original gigback which had only one back strap left. I decided to bike home and strap the guitar crosswise on my back… in hindsight I should have realised that the one strap could not be trusted. Anyway I biked for about 3m before the strao broke off completely and the guitar fell on the asphalt. Upon arriving home I found the damage you can see in the picture :( The tuning peg of the G string was very crooked, I pressed it back in shape and for the moment it seems relatively stable…

What do you think I should do? try to glue the piece together myself? get it done professionally? try to get a replacement headstock? thanks for any advice and condolences!

  • foggy@lemmy.worldEnglish
    0·
    4 months ago

    Absolutely not.

    Titebond draws materials together. Hide glue/wood glue expands.

    In this instance we want our adhesive to expand.

    There is no more amateur mistake you could make than using krazy glue, tite bond, or any other polyurethane-based adhesive, in a situation such as this.

      • foggy@lemmy.worldEnglish
        0·
        4 months ago

        You’re confidently incorrect.

        And annoying as fuck.

        This is where I block you.

    • rugburn@lemmynsfw.comEnglish
      0·
      4 months ago

      I also should have noted I fixed this exact same issue with hide glue, hence why I recommended it. It’s not hard to find and will do the job correctly, like @foggy said

      • foggy@lemmy.worldEnglish
        0·
        4 months ago

        Some liquid hide glues are marketed as wood glue. That’s what I was referring to when Id said wood and hide glue are the same. We were referring to the same thing. They’re not always the same thing though.

        It’s confusing.

        But you could use any wood glue, you should use hide glue, some wood glue is hide glue.

        In my world, hide glue and wood glue are the same thing. In a proper carpenter’s world, that is not the case. I only work on guitars/ukuleles

        • rugburn@lemmynsfw.comEnglish
          0·
          4 months ago

          Gotcha. Semantics lol. My understanding is if two pieces of wood used to be the same piece of wood (crack or break repair) use hide glue. If they’ve always been different pieces of wood to use titebond/pva wood glue.

          • foggy@lemmy.worldEnglish
            0·
            4 months ago

            That is what the luthier I studied with taught me as well.

            Sometimes, if the two pieces of wood don’t fit back together well enough, your unfortunate option is to sand them both down and use polyurethane. Which is why I would heavily advise against breaking the piece off! It’s already snug! :)