Need to let loose a primal scream without collecting footnotes first? Have a sneer percolating in your system but not enough time/energy to make a whole post about it? Go forth and be mid: Welcome to the Stubsack, your first port of call for learning fresh Awful you’ll near-instantly regret.
Any awful.systems sub may be subsneered in this subthread, techtakes or no.
If your sneer seems higher quality than you thought, feel free to cut’n’paste it into its own post — there’s no quota for posting and the bar really isn’t that high.
The post Xitter web has spawned soo many “esoteric” right wing freaks, but there’s no appropriate sneer-space for them. I’m talking redscare-ish, reality challenged “culture critics” who write about everything but understand nothing. I’m talking about reply-guys who make the same 6 tweets about the same 3 subjects. They’re inescapable at this point, yet I don’t see them mocked (as much as they should be)
Like, there was one dude a while back who insisted that women couldn’t be surgeons because they didn’t believe in the moon or in stars? I think each and every one of these guys is uniquely fucked up and if I can’t escape them, I would love to sneer at them.
(Semi-obligatory thanks to @dgerard for starting this.)
update: it’s out and recorded https://streaming.media.ccc.de/38c3/relive/316 also update on intentionally bricked trains story from year ago https://streaming.media.ccc.de/38c3/relive/336
update 2: oh no. oh no no no no
I look forward to your reactions why this is all quite a bad idea (and not just a bit cringe).
so i figured out what their naloxone synthesis is, it’s based on this paper https://sci-hub.se/10.1002/adsc.201300284 they say it’s two step, it’s not two step, it’s 6 steps in two critical one-pot sequences. paper starts with oxymorphone and they start with oxycodone for some reason, that’s one step extra. that transformation requires handling BBr3 which is nasty but clean or NaSEt which is also nasty but safer, but also requires column chromatography for purification. it still can fail in a way that gives products of activity opposite than intended. requires hard to get and rather more on expensive side reagents like vinylmagnesium bromide and burgess reagent, both require strictly anhydrous conditions to work. vinylmagnesium bromide and even solvent used with it (THF) will destroy that shitty PLA lid. final purification in paper requires column chromatography as well. not to mention elephant in the room, that if counterfeit oxy pills are used that contain fentanyl instead it gets you either nothing or fentanyl
and that’s just naloxone. nothing particularly hard if you know what are you doing and have right starting materials. commercial synthesis is entirely different btw. they also want to make cabotegravir, mifepristone and fucking gene therapy, and diy hrt which was already a thing wayy before they got to it, it involved shipping steroids out of Ukraine iirc and it worked because no garage synthesis was involved at all. at least they admitted that making monoclonal antibodies is probably out of their reach, how merciful of them. and that’s just first 15min
Thanks. The ending where he goes “how would I deal with company patent lawyers? Well flips them off” is a bit annoying as well. I heard some make diy E makers and distributers were jailed already. So setting up some assistance system for that would be nice (esp after you made it worse by making it easier for the courts to call them terrorists, sure the term has degraded but law wise this has consequences. I really hope he at least got some trans people involved before he started this (and i also really hope im wrong about the risks here, as trans people should get all the meds they want)).
he’s already easily covered under personal/research nonprofit use so he doesn’t have to care about any patents, it’s even opposite, he can use all patents all he wants np as long as there’s no profits associated with it. he takes donations tho and idk if it qualifies. not that copyright is the biggest problem here
I read through this with my wife who actually did a whole course of organic chemistry, pre-med, etc. Her reaction to your criticisms was largely “of course you would have to do that and that’d be a pain in the ass but it’s definitely doable.” And I feel like that’s probably true but at the same time as a reasonably smart dude this is the first time I’ve heard the majority of these words.
It feels like they’re reacting to the same tendency in tech culture that I’ve complained about before where specialized knowledge and domain expertise are treated like arcane revelations from beyond. It’s not that your average person is incapable of understanding or going through the relevant processes; Cs ,as the saying goes, get degrees and I’m sure many of the labs actually doing this work at scale are staffed largely by those C students. But it’s also worth acknowledging that there is a level of investment in time and resources required to actually do it and this kind of “you have nothing to lose but your pharmacological chains” rhetoric is dramatically underselling how difficult those processes are and how bad the consequences can be if you screw it up. Anyone who wants to try should first read The Iliad, the Oedipus cycle, and at least one other epic-sized meditation on hubris. And the once you’ve forged ahead read the relevant books on actually following the process for the love of God.
of course you can make it work but it’s more expensive and harder than normal commercial synthesis. with such limited analytical methods you might not even be able to tell that something went wrong (melting points can be completely fucked up by traces of solvent, same with IR) naloxone is actually a nice example of how you can design synthesis in order to make your life easier, in terms of purification at least. one of commercial syntheses looks like this
anyway that’s what i found in one chinese patent (CN104230945A). they start from oxycodone, which they make from thebaine, which they don’t have to make because it’s a natural product. there’s a very useful purification technique, column chromatography, that works like this: you take a tube, fill it with silicagel, then pour hexane through it, then put your compound on top of that silicagel column. silicagel is polar, and the more polar compound is, the stronger it is bound to it. so now in order to get your pure compound you wash this column with increasingly polar solvents, and this way you can recover various compounds in order from least polar to most. this allows you to get pure compounds most of the time
now, small changes in or near polar groups mean that polarity changes little. in particular, we can ignore for five minutes all these hydroxyls and just focus on amine because it’s the most polar part and any changes at other groups make polarity change in the same way anyway. step 2 is von braun degradation, and it removes methyl and turns amine into amide. this amide is very likely to have much lower polarity than starting product and so it can be easily separated on column. here specifically, it’s no longer basic so unreacted acetyloxycodone can be just washed away with acid extraction, which is good for both low tech and large scale. step 3 is hydrolysis, which gives us amine back, which again gives more polar product which means again that separation is easy. if some acetyloxycodone was left there, it would give very similar compound, just with that N-methyl left and separating it would be pretty hard. this here is especially important as N-methyl and N-allyl compounds have opposite effects
that weird synthesis with burgess reagent and everything else also allows for separation of these unreacted starting materials, but this requires column chromatography in the middle. if you skip it, maybe it’ll turn out alright or maybe you just fucked up for the last time. maybe mCPBA was old, or maybe burgess reagent or THF was wet, or any variety of random bullshit that someone inexperienced would not even register. and this is only one point that brings us to point 2: that jarduino is really juicero of backyard chemistry. to begin, you need dry solvents, and this is something you should do yourself if you want it to be done right. this means you need to reflux THF with drying agent of your choice, then distill it away to clean dry bottle, fill it with argon, ideally add molecular sieves and tape it shut. then you have to reflux something, this requires all glass flask because that 3d-printed head will melt under these conditions. at some point you also need sep funnel and rotovap and column, and so on and so on and it turns out that you already have all glassware to do it all the normal way and jarduino isn’t even needed for anything. (also i don’t understand their choice of peristaltic pumps, as they already put everything in syringes, this means that you can just use syringe pumps and use normal medical long needles for piping of sorts. it’s very chemically resistant as long as plungers aren’t rubber, which their demos had for some weird reason)
this is closer to the synthesis i thought they were using
if you swap oripavine for oxymorphone and cyclopropylmethyl bromide for allyl bromide, you should get naloxone, probably, in 2 steps. keeping cyclopropylmethyl bromide gets you naltrexone which also work it’s from this paper https://cdnsciencepub.com/doi/10.1139/cjc-2014-0552
then there are all the sterility requirements, as they want to make injectables in garage. i’m not pharmacist or biologist, but i expect it would be a bit harder to make it reliably and repeatably than what they make it look like. i take that your wife is a medical professional so if she weighed in on that, that would be nice
also, part of their advice is to just eyeball powder as a part of identification. this is a bad idea because how stuff looks like and behaves can change depending on humidity, traces of solvents if any, and ambient temperature, especially for low melting solids, and crystal habit can vary from batch to batch anyway and it’s not a reliable indicator of anything